標題: 新型含矽氧烷與亞醯胺之氰酸酯特性之研究
Synthesis and Properties of Cyanate Ester Containing Siloxane and Imide Groups
作者: 楊時韋
Shih-Wei Yang
林木獅
Mu-Shih Lin
應用化學系碩博士班
關鍵字: 矽氧烷;亞醯胺;氰酸酯;siloxane;imide;cyanate ester
公開日期: 2006
摘要: 本研究合成出含矽氧烷與亞醯胺之氰酸酯V。將商用環氧樹脂Tetraglycidyl meta-xylenediamine ( GA-240 )和含矽氧烷與亞醯胺之氰酸酯V依不同當量比例混合並交聯,由實驗結果來研究氰酸酯V對商用環氧樹脂的改質效果。   以FT-IR研究商用環氧樹脂和氰酸酯V反應過程中官能基的變化,以動態DSC在不同升溫速率研究其反應活化能,GA-240和氰酸酯V混合後的活化能,遠低於純GA-240,推測是由於氰酸酯V的三級胺催化所致。用TMA、TGA進行熱機械性質分析。研究結果顯示,交聯產物的玻璃轉移溫度約從199℃至207℃,而起始裂解溫度也比純GA-240的286℃高。交聯產物的介電常數經測試在3.2至4.3間。
  The research deals with synthesis of cyanate ester V containing siloxane and imide groups , which was then mixed with a commercial epoxy resin “Tetraglycidyl meta-Xylenediamine (GA-240)”, followed by curing in various equivalent ratios of GA-240/V. Functional group changes during curing reaction were investigated by FT-IR. The curing behavior was studied by dynamic DSC at different rising temperature rate. The curing activation energy of the epoxy resin that containing cyanate ester V was found much lower than the pure epoxy resin , presumably because of the catalysis of tertiary amine in the cyanate ester V. Thermal mechanical properties were measured by TMA and TGA. These cured materials indicate glass transition temperatures ranging from 199℃ to 207℃. On-set of decomposition temperature was found at around 286℃ for the pure GA-240 with improved thermal stability upon incorporation of cyanate ester V. The dielectric constants of the cured materials were in the range of 4.3 to 3.2.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT009425547
http://hdl.handle.net/11536/81427
Appears in Collections:Thesis


Files in This Item:

  1. 554701.pdf
  2. 554702.pdf
  3. 554703.pdf
  4. 554704.pdf
  5. 554705.pdf
  6. 554706.pdf