標題: 二維環形光子晶體雷射之設計與特性分析
Design and Characteristics of Two-Dimensional Circular Photonic Crystal Lasers
作者: 范峻豪
Chun-Hao Fan
李柏璁
Po-Tsung Lee
光電工程學系
關鍵字: 環形;有限時域差分法;共振腔;光子晶體;雷射;Circular;FDTD;Cavity;Photonic Crystal;laser
公開日期: 2005
摘要: 在本篇論文中,我們使用二維有限時域差分法計算出對稱性環形光子晶體雷射結構的光能隙、頻譜、和缺陷模態共振場圖。藉著這計算方法,我們能最佳化環形光子晶體雷射的設計,再把這些設計的元件確實的做出來。   為了分析二維環形光子晶體雷射的基本特性,我們利用自行架設的共焦顯微光譜系統量測作出來的元件並討論。藉由量測的結果與模擬的結果比較分析,可以得知我們量測到的雷射模態與我們預測的是相同的。並且藉由在共振腔中加個空氣孔洞去減少共振模態。最後,藉由跟準週期性光子晶體雷射作比較,我們可以得知環形光子晶體雷射有很好的雷射特性。
In this thesis, we calculated the photonic band gaps, resonance spectra, and defect mode profiles of symmetric two-dimensional circular photonic crystal lasers by using 2D finite-difference time-domain method. These help us to optimize design of circular photonic crystal lasers. And, these designed two-dimensional circular photonic crystal micro-cavity lasers were fabricated. In order to analyze the basic characteristics of two-dimensional circular photonic crystal lasers, we measured these lasers by a micro-scale photoluminescence system. We identified the lasing mode by comparing the measured results with the calculated results. Then, the side mode was reduced by adding central air hole. Finally, by comparing the lasing characteristics of circular photonic crystal lasers with these of 12-fold quasi-photonic crystal lasers, we found that the circular photonic crystal lasers have good lasing characteristics, such as ultra-low threshold and high quality factor.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT009324507
http://hdl.handle.net/11536/79169
Appears in Collections:Thesis


Files in This Item:

  1. 450701.pdf
  2. 450702.pdf
  3. 450703.pdf