標題: 利用非結構調適網格於三維直接蒙地卡羅法及其應用The Three-Dimensional Direct Simulation Monte Carlo Method Using Unstructured Adaptive Mesh and It Applications 作者: 吳富源FU-YUAN WU吳宗信Dr. Jong-Shinn Wu機械工程學系 關鍵字: 網格切割;調適網格;網格;ADAPTIVE MESH;MESH ADAPTATION;MESH 公開日期: 2001 摘要: 本研究完成非結構調適網格(h-refinement)於三維直接模擬蒙地卡羅法(Direct Simulation Monte Carlo Method)之應用。當網格內的Kn 小於標準值時，使用isotropic調適法建立新的網格。然而，這個簡易的方法會有多個重要的因素影響了蒙地卡羅法(DSMC)的表現。因此，我們應用了anisotropic調適法，移除懸掛點(hanging node)。它解決調適網格所會遇到懸掛點(hanging node)的所有困難。同時，這個方法所增加的工作量是可以忽略不計的。我們已然使用以氦氣，不同的網格:四面體的，六面體的，五面體的，或是三者混合的網格，測試高速度cavity流場，和超音流流經一圓球障礙物。結果證明，利用調適網格得到較好的改善。利用調適網格計算上的代價遠小於蒙地卡羅法(DSMC)本身。因此，我們得到一個結論，利用調適網格法較原始的非調適網格法有較正確的結果。The implementation of an adaptive mesh embedding (h-refinement) schemes using unstructured grid in three-dimensional Direct Simulation Monte Carlo (DSMC) method is reported. In this technique, local isotropic refinement is used to introduce new meshes where local cell Knudsen number is less than some preset value. This simple scheme, however, has several severe consequences affecting the performance of the three-dimensional DSMC method. Thus, we have applied a technique to remove the hanging node, by introducing the anisotropic refinement. This is completed by simply connect the hanging node(s) with the other non-hanging node(s) in the non-refined, interfacial cells. In contrast, this remedy increases negligible amount of work; however, it removes all the difficulties presented in the scheme with hanging nodes. We have tested the proposed scheme for Argon gas using different types of mesh, such as tetrahedron, hexahedron, and pyramid or mixed, to a high-speed driven cavity flow and, then, a hypersonic flow over a sphere. The results show an improved flow resolution as compared with that of unadaptive mesh. URI: http://140.113.39.130/cdrfb3/record/nctu/#NT900489098http://hdl.handle.net/11536/69220 顯示於類別： 畢業論文