Full metadata record
DC FieldValueLanguage
dc.contributor.author葉協鑫en_US
dc.contributor.authorShien-Shin Yehen_US
dc.contributor.author張翼en_US
dc.contributor.authorEdward Yi Changen_US
dc.date.accessioned2014-12-12T02:01:16Z-
dc.date.available2014-12-12T02:01:16Z-
dc.date.issued2003en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT009118538en_US
dc.identifier.urihttp://hdl.handle.net/11536/51079-
dc.description.abstract本論文以低壓有機金屬汽相沉積法(LP-MOCVD)在磷化銦鎵上成長砷化鎵,由於材料本身的特性,會在介面上自發性的產生磷砷化銦鎵。此四元混合層使InGaP/GaAs HBT的電流增益下降並降低蝕刻時的選擇比,因此在磷化銦鎵上成長砷化鎵時,減少四元混合層的厚度,將使元件的性能大大的增加。 在我們的實驗中,成長完磷化銦鎵後,以較低的溫度成長砷化鎵,這將使磷化銦鎵表面的磷原子較不易脫附,因此可顯著的減少磷砷化銦鎵四元混合層的厚度。此外,較低的磷原子脫附速率,可增加三氫化磷的中斷時間,這使的反應腔中殘留的三氫化磷明顯的減少,並減少磷砷化銦鎵的形成,從LT-PL及TEM的資料中,都可得到一致的證明。 最後我們以最佳化的條件,在砷化鎵中成長極薄的磷化銦鎵蝕刻阻障層,藉由實際的蝕刻的製程,我們發現20Å的磷化銦鎵蝕刻阻障層,可承受45秒的蝕刻而不被貫穿。因次,藉由我們最佳化的成長條件,可使傳統的砷化鎵/磷化銦鎵材料系統中所需的磷化銦鎵蝕刻阻障層的厚度顯著的減少。zh_TW
dc.description.abstractIn this study, we grow GaAs on InGaP by LP-MOCVD. Due to the material property of GaAs/InGaP material system, the InGaAsP intermixing layer formed spontaneously in the interface. This quaternary intermixing layer reduced HBT current gain and etching selectivity. Therefore as GaAs was grown on InGaP, the thinner the InGaAsP layer the better the performance of our devices. As our experiments were concerned, the after growth of InGaP, GaAs was grown at a lower temperature than that for InGaP. This made the P atoms on the InGaP surface hard to desorb and greatly reduce the thickness of InGaAsP intermixing layer. In addition, the lower desorption rate of P atoms increases the PH3 off time. This reduced the residual PH3 in the reactor chamber dramatically and restrained the formation of InGaAsP layer. Both the data of LT-PL and TEM confirmed the experimental results discussed above. Finally, we used the optimum conditions to grow an InGaP etching stop layer between GaAs layers. By carrying out the etching process, we found a 20Å InGaP etching stop layer will not be penetrated if the etching time were less than 45 sec. By using our optimum growth conditions, the required thickness of InGaP etching stop layer of GaAs/InGaP material will be greatly reduced.en_US
dc.language.isozh_TWen_US
dc.subject砷化鎵zh_TW
dc.subject磷化銦鎵zh_TW
dc.subject有機金屬汽象沉積法zh_TW
dc.subject蝕刻阻障層zh_TW
dc.subjectGaAsen_US
dc.subjectInGaPen_US
dc.subjectMOCVDen_US
dc.subjectEtching barrieren_US
dc.title砷化鎵/磷化銦鎵異質結構介面的LP-MOCVD成長與研究及其在蝕刻阻障層的應用zh_TW
dc.titleThe study of GaAs/InGaP heterostructre grown by LP-MOCVD and its application to etching stop layeren_US
dc.typeThesisen_US
dc.contributor.department材料科學與工程學系zh_TW
Appears in Collections:Thesis


Files in This Item:

  1. 853801.pdf
  2. 853802.pdf
  3. 853803.pdf
  4. 853804.pdf
  5. 853805.pdf
  6. 853806.pdf
  7. 853807.pdf
  8. 853808.pdf
  9. 853809.pdf
  10. 853811.pdf
  11. 853812.pdf