標題: 隱形眼鏡邊緣瑕疵檢測演算法之設計
Design of Edge Defect Detection Algorithm
作者: 洪竟堯
Hung, Jing-Yao
彭德保
Perng, Der-Baau
工業工程與管理學系
關鍵字: 隱形眼鏡;電腦視覺;瑕疵檢測;邊緣偵測;濾波器;contact lens;computer vision;defect detection;edge detection;filter
公開日期: 2009
摘要: 近年來使用隱形眼鏡矯正視力的消費者眾多,由於隱形眼鏡使用時會與眼球角膜直接接觸,因此隱形眼鏡的品質與消費者眼睛的健康有直接的影響。早期隱形眼鏡製造商大多採用人工目視檢查鏡片瑕疵,然而人工方式可能因個人主觀判斷不同以及個人疲勞程度不同,而對瑕疵之判別標準不一,因此鏡片品質難以作統一標準的把關。 近年來,隨著自動光學檢測技術蓬勃發展,隱形眼鏡之自動光學檢測機台已有些研究,但是隱形眼鏡邊緣瑕疵之檢測演算法部分,則尚有改善空間。本研究將改善過去萃取邊緣資訊的方法,並結合影像處理中邊緣偵測的概念,使用突波濾波器以及LOG濾波器,對隱形眼鏡邊緣進行兩階段式的檢測。針對具有大小邊情況之正常片隱形眼鏡所造成的偽陽性(False Positive),以及邊緣較細之邊緣瑕疵隱形眼鏡所造成的偽陰性(False Negative),應用本研究所提出的演算法都能有效的檢測出來,對於檢測正確率的提升,以及檢測誤判率的降低,有非常顯著的改善效果。
There are plenty of consumers using contact lenses to correct vision in recent years. Due to the contact lens will contact with users eyeball directly, the quality of contact lens has to be assured not to influence users eye health. Contact lens was generally inspected by quality inspectors in the past. However, owing to the diversity of individual subjective judgment and fatigue situation, there is no consistent inspection standard. The lens quality cannot always be guaranteed. Recently, with the development of auto-optical inspection (AOI) technology, several researches has been done on contact lens auto inspection. However, the available algorithms for edge defect detection still left room for improvement. This thesis proposed a robust edge defect detection algorithm based on surplus filter and LOG filter. The proposed algorithm performed extreme well for false positive detection of uneven yet qualified lenses and false negative detection of defective lenses with thinner edge. Experimentations showed that the proposed algorithm had a great improvement in the accuracy rate and reduction in the error rate of edge defect detection.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT079633523
http://hdl.handle.net/11536/42877
Appears in Collections:Thesis