標題: The design and development of a hydrostatic extrusion apparatus
作者: Hung, JC
Hung, CH
機械工程學系
Department of Mechanical Engineering
關鍵字: hydrostatic extrusion apparatus;high pressure;composite clad rods;hydrostatic extrusion test
公開日期: 31-八月-2000
摘要: The purpose of this research is to design and construct an experimental hydrostatic extrusion apparatus which has a maximum working pressure of 10 000 kg/cm(2). and to reduce the cost of this extrusion apparatus. The high-pressure extrusion container has been designed with two-layer pyramidal cylinders, and the material used was SKD61 which is cheap and readily available. Different materials and designs for high-pressure seals were tested and analyzed for the best combination performance. Problems in the extrusion processes using this device a ere analyzed and solved, which increased the reliability of the device. The results of extrusion experiments have established that this device is practicable, (C) 2000 Published by Elsevier Science S.A.
URI: http://dx.doi.org/10.1016/S0924-0136(00)00593-8
http://hdl.handle.net/11536/30321
ISSN: 0924-0136
DOI: 10.1016/S0924-0136(00)00593-8
期刊: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Volume: 104
Issue: 3
起始頁: 226
結束頁: 235
顯示於類別:期刊論文


文件中的檔案:

  1. 000089243800008.pdf