Full metadata record
DC FieldValueLanguage
dc.contributor.authorDeng, CSen_US
dc.contributor.authorHuang, JCen_US
dc.contributor.authorChin, JHen_US
dc.date.accessioned2014-12-08T15:43:47Z-
dc.date.available2014-12-08T15:43:47Z-
dc.date.issued2001-06-01en_US
dc.identifier.issn0890-6955en_US
dc.identifier.urihttp://dx.doi.org/10.1016/S0890-6955(01)00007-4en_US
dc.identifier.urihttp://hdl.handle.net/11536/29593-
dc.description.abstractThis work investigates the effect of drill shaft support misalignment on hole straightness in relation to the various control factors. Misalignments occur in machine spindles, intermediate supports and pilot bushings. Equations for axial hole straightness deviation are derived herein using the Euler column theory, and experiments are performed using Gundrill and BTA deep-hole drilling systems. Simulation results, Sakuma's method and experimental examinations are also presented. Taguchi methods and statistical techniques are used to formulate the experimental layout, analyze the effect of each control factor on the results, and optimize the setting for each control factor. Further experiments then verify these estimates. Six control factors were used in a modified L8 orthogonal array design. The confirmatory experiments revealed an average straightness deviation within the 95% confidence interval. (C) 2001 Published by Elsevier Science Ltd.en_US
dc.language.isoen_USen_US
dc.subjectdeep-hole drillingen_US
dc.subjectsupport misalignmenten_US
dc.subjecthole straightness deviation control factorsen_US
dc.titleEffects of support misalignments in deep-hole drill shafts on hole straightnessen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/S0890-6955(01)00007-4en_US
dc.identifier.journalINTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTUREen_US
dc.citation.volume41en_US
dc.citation.issue8en_US
dc.citation.spage1165en_US
dc.citation.epage1188en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000168594000005-
dc.citation.woscount19-
Appears in Collections:Articles