Title: 4-(Dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran doped red emitters in organic light-emitting devices
Authors: Liu, TH
Iou, CY
Wen, SW
Chen, CH
應用化學系
友訊交大聯合研發中心
Department of Applied Chemistry
D Link NCTU Joint Res Ctr
Keywords: organic light emitting devices;electroluminescence
Issue Date: 22-Sep-2003
Abstract: We have studied the device optimization of red 4-(Dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) dye doped Alq(3) emitters in organic light-emitting devices (OLED). By varying the hole injection materials, thickness of hole-transport layer and by evaporation with rubrene as co-dopant, efficiencies of 3.24 cd/A and near saturated CIE color coordinates of x = 0.643, y = 0.354 was achieved without needing additional doping of hole-trap with NPB. From experiments with film thickness variation, it is concluded that the improved electrofluorescent (EL) performance and color saturation are due to the synergistic effects of microcavity, device structural optimization as well as optimal doping of DCJTB with rubrene. We believe this luminance efficiency for red is by far one of the best ever reported for dye-doped electrofluorescent OLEDs. (C) 2003 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/S0040-6090(03)00861-7
http://hdl.handle.net/11536/27524
ISSN: 0040-6090
DOI: 10.1016/S0040-6090(03)00861-7
Journal: THIN SOLID FILMS
Volume: 441
Issue: 1-2
Begin Page: 223
End Page: 227
Appears in Collections:Articles


Files in This Item:

  1. 000185165600034.pdf