|標題:||A New Austenitic FeMnAlCrC Alloy with High-Strength, High-Ductility, and Moderate Corrosion Resistance|
Department of Materials Science and Engineering
|關鍵字:||spinodal decomposition;carbides;mechanical properties;corrosion;iron manganese aluminum chromium carbon alloy|
|摘要:||In this study, a new austenitic Fe-28%Mn-9%Al-6%Cr-1.8%C (in mass%) alloy is developed. Because the alloy contains a high density of fine (Fe,Mn)(3)AlC carbides within the austenite matrix, the alloy in the as-quenched condition exhibits an excellent combination of strength and ductility comparable to that of the aged FeMnAlC alloys. In addition, owing to the formation of a layer of Cr and Al oxides in the passive film formed on the alloys, the corrosion potential E(corr) (-538 mV) and the pitting potential E(pp) (-25 mV) of the present alloy in 3.5% NaCl solution are considerably higher than the E(corr) (-920 similar to-789 mV) and E(pp) (-500 similar to-240 mV) values of the as-quenched and aged FeMnAlC alloys. Whereas the tensile strength of the present alloy is almost the same as that of conventional AISI 410 martensitic stainless steel, the present alloy possesses superior ductility than AISI 410 martensitic stainless steel. Furthermore, in 3.5% NaCl solution, the E(pp) (-25 mV) of the present alloy is noticeably higher than that (-250 similar to-100 mV) of the conventional AISI 410 martensitic stainless steel. These results indicate that the present alloy in the as-quenched condition can possess high-strength and high-ductility as well as moderate corrosion resistance. [doi:10.2320/matertrans.M2010199]|
|Appears in Collections:||Articles|
Files in This Item:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.