標題: Hole roundness in deep-hole drilling as analysed by Taguchi methods
作者: Deng, CS
Chin, JH
機械工程學系
Department of Mechanical Engineering
關鍵字: BTA deep-hole drilling;control factor;roundness;Taguchi methods
公開日期: 2005
摘要: This work investigates the roundness of holes by application of Taguchi methods to BTA deep-hole drilling with reference to process factors. Taguchi methods and statistical techniques are used in experimental layout, in the analysis of each control factor, and in prediction of the optimum setting for control factors. A set of confirmatory tests is then conducted to verify the estimated response. Influences of the control factors are discussed, and the levels of factors that produce holes of desired roundness with sufficient robustness are presented.
URI: http://hdl.handle.net/11536/25211
http://dx.doi.org/10.1007/s00170-003-1825-5
ISSN: 0268-3768
DOI: 10.1007/s00170-003-1825-5
期刊: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume: 25
Issue: 5-6
起始頁: 420
結束頁: 426
Appears in Collections:Articles


Files in This Item:

  1. 000227953900002.pdf