標題: Highly efficient poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/Si hybrid solar cells with imprinted nanopyramid structures
作者: Chen, Jheng-Yuan
Yu, Ming-Hung
Chang, Shun-Fa
Sun, Kien Wen
應用化學系
Department of Applied Chemistry
公開日期: 23-九月-2013
摘要: High-efficiency hybrid solar cells based on nanostructured silicon and poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate), which were fabricated via a simple nanoimprint fabrication process, demonstrated an excellent power conversion efficiency of 10.86%. The complex and costly high-temperature photolithography and masking steps were replaced by techniques that are low-cost and capable of mass production. The nanopyramid structures fabricated on the silicon surface provided an antireflective effect and have a radial junction architecture that enhanced the light absorption and carrier collection efficiency. The short-circuit current density (J(sc)) of the hybrid solar cell with nanopyramid structures was greatly improved from 24.5 mA/cm(2) to 32.5 mA/cm(2) compared with that of a flat surface device. The highest solar cell efficiency was achieved on a 525 mu m-thick 2.3 Omega cm n-type Czochralski process (CZ) Si substrate with a designated area of 4 cm(2). (C) 2013 AIP Publishing LLC.
URI: http://dx.doi.org/10.1063/1.4822116
http://hdl.handle.net/11536/22746
ISSN: 0003-6951
DOI: 10.1063/1.4822116
期刊: APPLIED PHYSICS LETTERS
Volume: 103
Issue: 13
結束頁: 
顯示於類別:期刊論文


文件中的檔案:

  1. 000325284500106.pdf