標題: Small mechanical press with double-axis servo system for forming of small metal products
作者: Cheng, Pi-Ying
Chen, Pin-Jyun
Lin, Yu-Ting
機械工程學系
Department of Mechanical Engineering
關鍵字: Metal forming;Servo press;B-spline curve
公開日期: 1-十月-2013
摘要: Multi-axis servo systems have been applied to many machine tools in recent decades, but they are not commonly used for press machines. They are particularly uncommon for small presses because it is still believed that the precision of a small press is dependent on the precision of its components and parts. However, high-precision components and parts are difficult to manufacture and assemble, so the costs of small precision presses are roughly equal to or higher than those of large press machines. Moreover, the accuracy of conventional small presses worsens over long operation times, particularly when dealing with off-center loading frequency. Therefore, we propose a small mechanical press with an adjustable driving system, using a slide and double-axis servo system, for manufacturing small products. Through this proposed design, we expect higher-quality products to be produced for lesser cost than conventional small presses.
URI: http://dx.doi.org/10.1007/s00170-013-4851-y
http://hdl.handle.net/11536/22705
ISSN: 0268-3768
DOI: 10.1007/s00170-013-4851-y
期刊: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume: 68
Issue: 9-12
起始頁: 2371
結束頁: 2381
顯示於類別:期刊論文


文件中的檔案:

  1. 000325261400041.pdf