標題: ADAPTIVE-CONTROL OPTIMIZATION IN END MILLING USING NEURAL NETWORKS
作者: CHIANG, ST
LIU, DI
LEE, AC
CHIENG, WH
交大名義發表
機械工程學系
National Chiao Tung University
Department of Mechanical Engineering
公開日期: 1-四月-1995
摘要: In this paper, we propose an architecture with two different kinds of neural networks for on-line determination of optimal cutting conditions. A back-propagation network with three inputs and four outputs is used to model the cutting process. A second network, which parallelizes the augmented Lagrange multiplier algorithm, determines the corresponding optimal cutting parameters by maximizing the material removal rate according to appropriate operating constraints. Due to its parallelism, this architecture can greatly reduce processing time and make real-time control possible. Numerical simulations and a series of experiments are conducted on end milling to confirm the feasibility of this architecture.
URI: http://hdl.handle.net/11536/1991
ISSN: 0890-6955
期刊: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume: 35
Issue: 4
起始頁: 637
結束頁: 660
顯示於類別:期刊論文


文件中的檔案:

  1. A1995QA51500010.pdf