Full metadata record
DC FieldValueLanguage
dc.contributor.authorCheng, Chen-Chinen_US
dc.contributor.authorLin, Tsung-Yinen_US
dc.contributor.authorChen, Ren-Hawen_US
dc.date.accessioned2019-04-03T06:47:49Z-
dc.date.available2019-04-03T06:47:49Z-
dc.date.issued2007-01-01en_US
dc.identifier.isbn978-0-8194-6813-0en_US
dc.identifier.issn0277-786Xen_US
dc.identifier.urihttp://dx.doi.org/10.1117/12.732241en_US
dc.identifier.urihttp://hdl.handle.net/11536/146666-
dc.description.abstractOptomechanics is defined as the science or engineering of maintaining the proper shapes and positions of the functional elements in an optical system. At the optomechanical interface, manufacturing tolerances affect the shape and position of the surface in a lens system. Even very small variations will cause extra aberrations which degrade the optical performance of a lens system. The traditional approach to the optomechanical tolerance design is a top-down process. The optical designers typically designate the critical to quality parameters, such as tolerances of tilts, decenters, and locations of optical elements. A significant drawback of this top-down process is that the tolerances determined by optical designers do not take the real manufacturing and assembly process into consideration. As a result, some tolerances are too tight for the manufacturing, and the yield rate of the production is difficult to improve. The objective of this study is to develop a surface based optomechanical tolerance model that calculates the variation of the critical to quality parameters for a lens system. The distribution of these parameters can be treated as inputs to the optical design. Therefore, the optical performance will be predictable than the top-down approach, and the manufacturability of the optical system can be improved.en_US
dc.language.isoen_USen_US
dc.subjectoptomechanicsen_US
dc.subjecttoleranceen_US
dc.subjectassemblyen_US
dc.subjectlens systemen_US
dc.titleA study on the optomechanical tolerance model for lens assemblyen_US
dc.typeProceedings Paperen_US
dc.identifier.doi10.1117/12.732241en_US
dc.identifier.journalNEW DEVELOPMENTS IN OPTOMECHANICSen_US
dc.citation.volume6665en_US
dc.citation.spage0en_US
dc.citation.epage0en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000253450700014en_US
dc.citation.woscount3en_US
Appears in Collections:Conferences Paper


Files in This Item:

  1. 484f92100078d7aa00e521c52390ccf8.pdf