標題: Dynamic Analysis of a Micro Drilling System by the Modified Transfer Matrix Method
作者: Lee, An-Chen
Danh-Tuyen Nguyen
機械工程學系
Department of Mechanical Engineering
公開日期: 1-Jan-2016
摘要: Normally, breakage is the main cause of failure of a micro drilling system, of which coupling effect of lateral and torsional displacements plays the most important role. This research developed a modified transfer matrix method to investigate the dynamics of a micro drilling system focusing on displacements induced by not only lateral, shear, torsional deformations, but also the coupling effect between lateral and torsional vibrations. The micro drilling system is modeled as pre-twisted rotating Timoshenko beam elements with a continuous-system concept. Each element includes components of linear bearings, axial drilling force, gyroscopic moments, and eccentricity. The overall transfer matrix of the system is developed to determine the state vector of the system including displacements and forces. Finally, a numerical example was presented, where the lateral and torsional displacements and critical speed of the micro drilling system at the micro drill's tip were presented.
URI: http://dx.doi.org/10.1051/matecconf/20166101024
http://hdl.handle.net/11536/136470
ISSN: 2261-236X
DOI: 10.1051/matecconf/20166101024
期刊: INTERNATIONAL SEMINAR ON APPLIED PHYSICS, OPTOELECTRONICS AND PHOTONICS (APOP 2016)
Volume: 61
起始頁: 0
結束頁: 0
Appears in Collections:Conferences Paper


Files in This Item:

  1. 9b8060644187b20344e26de616798f71.pdf